Москва, Полесский проезд, д. 16, строение 1, офис 307гСанкт-Петербург, пр. Медиков, д. 3, офис 307
Войти
Обратный звонок

BIS стандарты Индии

1. Products Requiring BIS Certification (Scheme I, ISI Mark Scheme)
НомерПродукт
Cement (any variety of cement manufactured or sold in India) such as
IS 12330Sulphate Resisting Portland Cement
IS 12600Low heat Portland Cement
IS 1489 (Part 1)Portland Pozzolana Cement-Part1 Fly-ash based
IS 1489 (Part 2)Portland Pozzolana Cement-Part 2 Calcined clay based
IS 269Ordinary Portland Cement
IS 3466Masonry Cement
IS 455Portland Slag Cement
IS 6452High Alumina Cement for Structural use
IS 6909Super sulphated cement
IS 8041Rapid hardening Portland cement
IS 8042White Portland Cement
IS 8043Hydrophobic Portland Cement
IS 8229Oil well Cement
IS 16415: 2015Composite Cement- Specification.
IS 16993: 2018Microfine Ordinary Portland Cement- Specification.
IS 15895: 2018High Alumina Refractory Cement.
Household Electrical goods
IS 12640 (Part 1)Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs)
IS 12640 (Part 2)Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs)
IS 13010AC watt-hour meters, class 0.5, 1 & 2
IS 13779AC static watt-hour meters, class 1 & 2
IS 14697AC static transformer operated watt-hour and VAR-hour meters, class 0.2S & 0.5S
IS 15111 (Part 1 & 2)Self Ballasted Lamps for General Lighting Services – Part 1 : Safety Requirements & Part 2 : Performance Requirements
IS 302 (Part 2/Sec 3)Safety of household and similar electrical appliances – Electric iron
IS 302 (Part 2/Sec 201)Safety of household and similar electrical appliances– Electric immersion water-heaters
IS 302 (Part 2/Sec 202)Safety of household and similar electrical appliances –Electric stoves
IS 302 (Part 2/Sec 30)Safety of household and similar electrical appliances-Room heaters
IS 3854Switches for domestic and similar purposes
IS 418Tungsten filament general service electric lamps (upto100 W )
IS 694PVC insulated cables for working voltages up to and including 1100V
IS 8828 *Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations
IS 9968 (Part 1)Elastomer insulated cables (Part.1): For working voltages up to and including1100 V
* Since revised as IS/IEC 60898
Batteries
IS 8144Multi-Purpose dry batteries
Food & Related Products
IS 15757Follow–up formula –complimentary foods
IS 11536Processed cereal based complementary foods
IS 1165Milk-powder
IS 1166Condensed milk, partly skimmed and skimmed condensed milk
IS 12176Sweetened ultra high temperature treated condensed milk
IS 13334 (Part 1)Skimmed milk-powder, standard grade
IS 13334 (Part 2)Skimmed milk-powder, extra grade
IS 13428Packaged Natural Mineral Water
IS 14433Infant milk substitutes
IS 17945: 2022Food for Special Medical Purpose intended for Infants
IS 14542Partly skimmed milk powder
IS 14543Packaged Drinking Water (Other than Packaged Natural Mineral Water)
IS 1656Milk- cereal Based Complementary foods
IS 14625Plastic Feeding Bottles
IS 5168Glass Feeding Bottles
Oil Pressure Stoves
IS 10109Oil pressure stove, offset burner type
IS 2787Multi-burner oil pressure stoves
IS 1342Oil pressure stoves
Automobile Accessories
IS 13098Automotive vehicles –Tubes for pneumatic tyres
IS 15627Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles
IS 15633Automotive vehicles-Pneumatic tyres for passenger car vehicles– Diagonal and radial ply
IS 15636Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply
Cylinder, Valves and Regulator
IS 14899Liquefied petroleum gas containers for automotive use
IS 15100Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use
IS 3196 (Part 4)Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases
IS 3196 (Part 1)Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG)
IS 3196 (Part 2)Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG.
IS 3224Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders
IS 3745Yoke Type Valve Connection for Small Medical Gas Cylinders
IS 7142Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity
IS 7285 (Part 1)Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders
IS 7285 (Part 2)Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2)
IS 7302Valve fittings for gas cylinder valves for use with breathing apparatus
IS 7312Welded and seamless steel dissolved acetylene gas cylinders
IS 8737Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders
IS 8776Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity
IS 9798Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures
Medical Equipment
IS 3055 (Part 1)Clinical thermometers :Part1 Solid stem type
IS 3055 (Part 2)Clinical thermometers :Part 2 Enclosed scale type
IS 7620 (Part 1)Diagnostic Medical X-Ray Equipment
Steel and Iron Products
IS 1785 (Part 1) : 1983Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire
IS 1785 (Part 2) : 1983Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire
IS 6003:2010Indented wire for Pre-stressed concrete
IS 6006:2014Uncoated stress relieved strand for Pre-stressed concrete.
IS 13620:1993Fusion bonded epoxy coated reinforcing bars
IS 14268:1995Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete.
IS 277:2003Galvanized steel sheets ( plain and corrugated).
IS 2002:2009Steel plates for pressure vessels for intermediate and high temperature service including boilers.
IS 2041:2009Steel plates for pressure vessels used at moderate and low temperature
IS 2830:2012Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose
IS 1786:2008High strength deformed steel bars and wires for concrete reinforcement
IS 648:2006Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)
IS 3024:2015Grain oriented electrical steel sheet & strip (CRGO)
IS 15391:2003Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification.
IS 2062:2011Hot rolled medium and high tensile structural steel
IS 432 : Part 1:1982Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars
IS 432 : Part 2:1982Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire
IS 513 (Part-1): 2016Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose
IS 513(Part-2):2016Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel
IS 1079: 2017Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification.
IS 1875:1992Carbon steel billets, blooms, slabs and bars for forgings.
IS 2879:1998Mild steel for metal arc welding electrodes.
IS 3502:2009Steel Chequered Plates
IS 5872:1990Cold Rolled Steel Strips (Box Strappings).
IS 5986: 2017Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification.
IS 6240:2008Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders
IS 7283:1992Hot Rolled bars for production of bright bars and machined parts for engineering applications.
IS 7887:1992Mild steel wire rods for general engineering purposes.
IS 10748:2004Hot Rolled Steel Strip for Welded Tubes and Pipes.
IS 11513:2017Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification
IS 15647:2006Hot rolled steel narrow width strip for welded tubes and pipes
IS 7904:2017High carbon steel wire rods- Specification
IS 14246:2013Continuously pre-painted galvanized steel sheets and coils
IS 15965:2012Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain).
IS 280: 2006Mild steel wire for General Engineering purposes.
IS 1835:1976Round Steel wire for ropes
IS 3975:1999Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables
IS 4368:1967Alloy Steel billets, blooms and slabs for forging for general engineering purposes.
IS 4454 (Part 1) : 2001Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire.
IS 4454 (Part 2): 2001Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire.
IS 4824:2006Bead Wires for Tyres
IS 11169 (Part 1): 1984Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels
IS 11587:1986Structural Weather resistant steel.
IS 15103: 2002Fire resistant Steel- Specification
IS 15914:2011High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder.
IS 15961:2012Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain)
IS 15962:2012Structural Steel for Building for Structures with improved seismic Resistance
IS 6527:1995Stainless Steel wire Rod
IS 6528:1995Stainless Steel Wires
IS 6603:2001Stainless Steel Bars and Flats
IS 5522:2014Stainless Steel sheets and strips for utensils- Specification
IS 6911:2017Stainless Steel Plate, Sheet and Strip- Specification
IS 15997:2012Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification
IS 1110 : 1990Ferrosilicon – Specification
IS 4409 : 1973Specification for Ferronickel
IS 1029 : 1970Specification for Hot rolled steel strip (bailing)
IS 2385 : 1977Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate
IS 3039 : 1988Specification for Structural steel for construction of hulls of ships
IS 9550 2001Bright steel bars – v Specification
IS 3748 : 1990Tool and die steels – Specification
IS 5517 : 1993Steel for hardening and tempering – Specification
IS 16732: 2019Galvanized Structural Steel – Specification
IS 7494 : 1981Specification for Steel for valves for internal combustion engines
IS 12146 : 1987Specification for Carbon manganese steel forgings for pressure vessels
IS 16585 : 2016Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state.
IS 2831 : 2012Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification
IS 1148: 2009Steel Rivet Bars (medium And High Tensile) – For Structural Purposes
IS 1673: 1984Specification for Mild Steel Wire, Cold Heading Quality
IS 1812: 1982Specification for Carbon Steel Wire for the Manufacture of Wood Screws
IS 2507: 1975Specification for Cold – rolled Steel Strips For Springs.
IS 2255: 1977Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process).
IS 3195: 1992Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification .
IS 3431: 1982Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension.
IS 3885-Part-1: 1992Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification.
IS 3885-Part- 2: 1992Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification.
IS 4223: 1975Specification for Steel Wire for Umbrella Ribs .
IS 4224: 1972Specification for Steel Wire for Staples, Pins And Clips.
IS 4397: 1999Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification.
IS 4398: 1994Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification
IS 6902: 1973Specification for Steel Wire for spokes.
IS 6967: 1973Specification for Steel For Electrically welded round Link Chains.
IS 7226: 1974Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes.
IS 7557: 1982Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets.
IS 8052: 2006Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification.
IS 8951: 2001Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification
IS 8952: 1995Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification
IS 9476: 1980Specification for Cold rolled steel strips for carbon steel razor blades.
IS 9962: 1981Specification for Steel Wire for Needles.
IS 17111: 2019 (ISO 683- 17: 2014)Heat-Treated Steels Alloy and Free-Cutting Steels — Ball and Roller Bearing Steels.
IS 14331:1995Steels for High Temperature Bolting Applications – Specification
IS 12594: 1988Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement – Specification
IS 14650:1999Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification
IS 4882: 1979Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry
IS 2090:1983Specification for High Tensile Steel Bars used in Pre-stressed Concrete
IS 6529:1996Stainless Steel Blooms Billets And Slabs For Forging
IS 9294:1979Cold-Rolled Stainless Steel Strips for Razor Blades
IS 10631:1983Stainless Steel for welding electrode core wire
IS 10632 (Part 2):1983Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire.
IS 10632 (Part 3):1983Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates.
IS 11169 (Part 2): 1989Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel
IS 5651:1987Steels for Pneumatic Tools
IS 9516:1980Heat Resisting Steels
IS 11952:1986Steels For Piston Pins (Gudgeon Pins)
IS 12045:1987Alloys Used in Electrical Resistance Metallic Heating Elements
IS 14652:199918 Percent Nickel Maraging Steel Bars and Rods
IS 1566:1982Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement
IS 1170: 1992Ferrochromium – Specification
IS 11946:1987Soft Magnetic Iron Strips
IS 11947:1987Soft Magnetic Iron Rods, Bars Flats and Sections
IS 963: 1958Chrome molybdenum steel bars and rods for aircraft purposes
IS 4454 (Part 4): 2001Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire
IS 1993 : 2018Cold-reduced Electrolytic Tin Plate
IS 12591:2018Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel
IS 412:1975Expanded Metal Steel Sheets For General Purposes
IS 2100: 1970Steel Billets,Bars And Sections For Boilers
IS 2589: 1975Hard Drawn Steel Wire For Upholstery Springs
IS 3298: 1981Mild Steel Rivet Bars For Ship Building
IS 4072: 1975Steel For Spring Washers
IS 8510 (Part II): 1977Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires
IS 8510 (PartIII): 1977Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires
IS 8563: 1977Half Round Mild Steel Wire For The Manufacture of Split Pins
IS 8564: 1977Steel Wire For Nipples For Spokes
IS 8565: 1977Heald Wire
IS 8566: 1977Steel Wire For Reeds
IS 8917: 1978Plates For Galvanizing Pots
IS 9442: 1980Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs
IS 9485: 1980Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling
IS 10794: 1984Mild steel wire for cotter pins
IS 12262:1988Trapezoidal Steel Wire For Springs Washers
IS 1470: 2013Silicomanganese – Specification
IS 15911:2010Structural Steel (Ordinary Quality)
IS 1171: 2011Ferromanganese – Specification
IS 4431: 1978Carbon And Carbon- Manganese Free- Cutting Steels
IS 4432: 1988Case Hardening Steels
IS 5518: 1996Steels For Die Blocks For Drop Forging
IS 8748: 1978Forged/Rolled CTC Segments
IS 12145: 1987Quenched And Tempered Alloy Steel Forgings For Pressure Vessels
IS 13387: 1992Tool Steel Forgings For Metal Forming
IS 14698:1999Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services
IS/ISO 11951 : 2016Cold – Reduced tinmill products – Blackplate
IS 3930: 1994Flame And Induction Hardening Steels
IS 5478: 1969Thermostat Metal Sheet and Strip
IS 13352: 1992Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs
IS 16644: 2018Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete
IS 17404 : 2020Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips
IS 8329 : 2000Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage
IS 9523:2000Ductile iron fittings for pressure pipes for water, gas and sewage
IS 1161:2014Steel tubes for structural purposes
IS 1239 (Part 1):2014Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes
IS 4270:2001Steel tubes used for water-wells (upto 200 mm dia)
IS 9139:1979Specification for Malleable iron shots and grits for use in foundries
Electrical Transformers
IS 1180 (Part 1)Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed
Electrical Motors
IS 12615Energy Efficient Induction Motors-Three Phase Squirrel Cage
Capacitors
IS 2993A.C. motor capacitors
IS 13340Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V
IS 13585 Part 1Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation
Chemicals, Fertilizers, Polymers & Textiles
IS 252:2013Caustic Soda -Specification
IS 10116 : 2015Boric Acid – Specification
IS 15573Poly Aluminium Chloride
IS 695Acetic Acid
IS 2833Aniline
IS 517Methanol
IS 5158: 1987Specification for Phthalic Anhydride, Technical
IS 8058:2018Pyridine
IS 16113:2013Gamma Picoline
IS 16112:2013Beta Picoline
IS 12084: 2018Morpholine
IS 297:2001Sodium Sulphide, Technical
IS 7129:1992Potassium Carbonate, Anhydrous
IS 170:2004Acetone
IS 4581:1978Phosphorous Trichloride, pure and Analytical Reagent
IS 11744:1986Phosphorous Pentachloride, Technical
IS 11657:1986Phosphorous Oxychloride, Technical
IS 2080:2021Stabilized Hydrogen Peroxide
IS 3205:1984Precipitated Barium Carbonate, Technical
IS 12928:1990Precipitated Barium for Ceramic and Glass Industry
IS 4505:2015Sodium Formaldehyde Sulphoxylate
IS 6100:1984Sodium Tripolyphosphate, Anhydrous, Technical
IS 14709:1999n- Butyl Acrylate
IS 336:1973Ether
IS 5295:1985Ethylene Glycol
IS 537:2011Toluene
IS 15030:2001Terephthalic Acid
IS 14707: 1999Methyl Acrylate
IS 14708:1999Ethyl Acrylate
IS 12345:1988Vinyl Acetate Monomer
IS 4105:2020Styrene (Vinyl Benzene)
IS 5149:2020Maleic Anhydride, Technical
IS 12540:1988Acrylonitrile
IS 17265:2019100 Percent. Polyester Spun Grey and White Yarn (PSY)
IS 17261:2019Polyester Continuous Filament Fully Drawn Yarn (FDY)
IS 17264:2019Polyester Industrial Yarn (IDY)
IS 17262:2019Polyester Partially Oriented Yarn (POY)
IS 17263:2019Polyester Staple Fibres (PSF)
IS 7328:2020Polyethylene Material for moulding and extrusion
0(i) Low Density Polyethylene (LDPE)
0(ii) Linear Low-Density Polyethylene (LLDPE)
0(iii) High Density Polyethylene (HDPE)
IS 11356:2020Styrene-Butadiene Rubber Latex
IS 16481:2016Synthetic Micro-Fibres for use in Cement Based Matrix
IS 12795:2020Linear Alkyl Benzene
IS 13601:1993Ethylene Vinyl Acetate (EVA) Copolymers
IS 7686:20203(N, N-DiEthyl) Aminophenol
IS 4566:2020Methylene Chloride (Dichloromethane)
IS 2012:2006Red Phosphorus
IS 17077 :2019/ISO 19062-1 : 2015Acrylonitrile Butadiene Styrene (ABS)
IS 869:2020Ethylene Dichloride
IS 17370:2020p-Xylene
IS 14434:1998Polycarbonate
IS 17397 (Part 1) : 2020/ISO 16365-1 : 2014Polyurethanes
IS 17442:2020Vinyl Chloride Monomer
IS 17450 : 20201,3 Phenylenediamine
IS 10931 : 1984Lauric Acid
IS 12029 : 1986Acid Oil
IS 12067: 1987Palm Fatty Acids
IS 12068 :1987Rice Bran Fatty Acids
IS 12069 : 1987Coconut Fatty Acids
IS 12124 : 1987Rubberseed Fatty Acids
IS 12361 :1988Hydrogenated Rice Bran Fatty Acids
Kitchen Appliances
IS 302 (Part 2/ Section 14)Hand-held Blender
IS 4250Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer
Domestic Water Heaters for use with LPG
IS 15558Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas
Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls
IS 1391 (Part-1): 2017Room Air Conditioners- Specification Part 1 Unitary Air Conditioners
IS 1391 (Part-2): 2018Room Air Conditioners- Specification Part 2 Split Air Conditioners
IS 8148:2018Ducted and Package Air Conditioners
IS 11329:2018Finned type Heat Exchanger for Room Air Conditioner
IS 10617:2018Hermetic compressor
0Hermetic Compressors-Specification
Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy
IS 1293 : 2005Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes
IS 15884:2010Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2)
Domestic Gas Stoves for use with Liquefied Petroleum Gases
IS 4246: 2002Domestic Gas Stoves for use with Liquefied Petroleum Gases
Transparent Float Glass
IS 14900: 2018Transparent Float Glass
Domestic Pressure Cooker
IS 2347:2017Domestic Pressure Cooker
Cables
IS 1554(Part 1) : 1988Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V
IS 1554(Part 2) : 1988Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kV
IS 7098 (Part 1) : 1988Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V
IS 7098 (Part 2) : 2011Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV
IS 7098 (Part 3) : 1993Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV
IS 14255 : 1995Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – Specification
IS 9968 (Part 2) : 2002Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV
IS 8784 : 1987Specification for Thermocouple Compensating Cables
IS 9857 : 1990Welding Cables – Specification
IS 14494 : 2019Elastomer Insulated Flexible Cables for Use in Mines – Specification
IS 2593 : 1984Specification for Flexible Cables for Miner’s Cap-Lamps
IS 5950 : 1984Specification for Shot Firing Cables (for use other than in shafts)
IS 17048 : 2018Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – Specification
Rubber Hose for Liquefied Petroleum Gas (LPG)
IS 9573(Part 1):2017Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application
IS 9573(Part 2):2017Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application.
Aluminium Foil
IS 15392Aluminium and Aluminium Alloy Bare Foil for Food Packaging
Non Electric Toys
IS 9873 (Part 1) : 2018Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties.
IS 9873 (Part 2) : 2017Safety of Toys Part 2 Flammability.
IS 9873 (Part 3) : 2017Safety Requirements for Toys Part 3 Migration of Certain Elements.
IS 9873 (Part 4) : 2017Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use.
IS 9873 (Part 7) : 2017Safety of Toys Part 7 Requirements and Test Methods for Finger Paints.
IS 9873 (Part 9) : 2017Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products.
Electric Toys
IS 15644: 2006Safety of Electric Toys.
Flat Transparent Sheet Glass
IS 2835 : 1987Flat Transparent Sheet Glass.
Safety Glass
IS 2553 (Part 1):2018Safety Glass -Specification Part 1 Architectural, Building and General uses.
IS 2553 (Part 2):2019Safety Glass -Specification Part 2 For Road Transport .
Woven Sacks
IS 14887:2014Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram Foodgrains
IS 16208:2015Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram Foodgrains
IS 14968:2015Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram Sugar
IS 14252:2015Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling Sand
Butterfly Valves
IS 13095:1991Butterfly valves for general purpose
Reflectors for Bicycles
IS/ISO 6742-2:2015Retro-reflective Devices
Paper
IS 14490:2018Plain Copier Paper
Cattle Feeds
IS 2052 : 2009Compounded Feeds for Cattle
Automobile Wheel Rim Component
IS: 16192 (Part 1)Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1 Light Alloy Wheel Rims Method of Tests and Requirements
IS: 16192 (Part 2)Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2 Sheet Metal Wheel Rims Method of Tests and Requirements
IS: 16192 (Part 3)Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3 Spoke Wheel Rims Method of Tests and Requirements
IS: 9436Performance Requirements and Methods of Tests for Wheels for Passenger Cars
IS: 9438Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and Buses
Foot Wear
IS 5557: 2004Industrial and protective rubber knee and ankle boots
IS 5557 (Part 2): 2018All rubber gum boots and ankle boots
IS 5676: 1995Moulded solid rubber soles and heels
IS 6664: 1992Rubber microcellular sheets for soles and heels
IS 6719: 1972Solid PVC soles and heels
IS 6721: 1972PVC sandal
IS 10702: 1992Rubber Hawai Chappal
IS 12254: 1993Polyvinyl chloride(PVC) industrial boots
IS 13893: 1994Polyurethane sole, semirigid
IS 13995: 1995Unlined moulded rubber boots
IS 16645: 2018Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use
IS 16994: 2018Footwear for men and women for municipal scavenging work
IS 1989 (Part 1): 1986Leather safety boots and shoes for miners
IS 1989 (Part.2): 1986Leather safety boots and shoes for heavy metal industries
IS 3735: 1996Canvas Shoes Rubber Sole
IS 3736: 1995Canvas Boots Rubber Sole
IS 3976: 2018Safety Rubber Canvas Boots for Miners
IS 11226: 1993Leather safety footwear having direct moulded rubber sole
IS 14544: 1998Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole
IS 15844(Part-1): 2023Sports Footwear for General Purpose
IS 15844(Part-2): 2023Sports Footwear for Performance Sports Footwear
IS 15844(Part 3): 2024Sports Footwear for Professional Sports Footwear
IS 17012: 2018High ankle tactical boots with PU – Rubber sole
IS 17037: 2018Antiriot shoes
IS 17043 (Part-1): 2024Shoes for Services
IS 17043 (Part-2): 2024Shoes for General Purpose
IS 15298 (Part 2): 2016Personal protective equipment – Part 2 Safety Footwear
IS 15298 ( Part 3) : 2019Personal protective equipment – Part 3 Protective Footwear
IS 15298 (Part 4) : 2017Personal protective equipment – Part 4 Occupational Footwear
Press Tool-Punches
IS 4296 (Part 1):2016Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank
IS 4296 (Part 2):2016Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced Shank
IS 4296 (Part 3):2016Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced Shank
Helmet for riders of Two Wheeler Motor Vehicles
IS 4151: 2015Helmet for riders of Two Wheeler Motor Vehicles
Refrigerating Appliances
IS 17550 (Part 1): 2021Household Refrigerating Appliances- Characteristics and Test Methods part-1 General Requirements
IS 7872: 2018Freezers
Centrifugally cast (Spun) iron pipes
IS 1536: 2001Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage
IS 3989: 2009Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories
IS 15905: 2011Hubless centrifugally cast (Spun) iron pipes, fittings and accessories – Spigot series
Flux Cored (Tubular) Electrodes
IS 15769:2008Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel
Sewing Machine
IS 15449 : Part 1 : 2004Household Zig-Zag Sewing Machine Head
Water Treatment System
IS 16240 : 2023Reverse Osmosis Based Point of Use Water Treatment System for Drinking Purposes
Jute Bag
IS 1943:1995A- twill Jute Bag
IS 2566:1993B-twill Jute bags for packing foodgrains
IS 12650:2018Jute bags for packing 50 Kg foodgrains
IS 15138:2010Jute bags for packing 50 Kg sugar
IS 16186:2014Light weight jute sacking bags for packing 50 Kg foodgrains
IS 16372:2015Jute bags for packing up to 30 Kg foodgrains
IS 17266:2019Viscose Staple Fibres
IS 15351 : 2015Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining
IS 15909 : 2020Poly Vinyl Chloride (PVC) Geomembranes
IS 16653 : 2017Needle punched non-woven geobags
IS 16654: 2017Polypropylene Multifilament woven geobags
IS 14715 (Part 1): 2016Jute Geotextiles
IS 14715 (Part 2): 2016Jute Geotextiles
IS 15869 : 2020Open Weave Coir Bhoovastra
IS 16391 : 2015Geotextiles used in sub-grade separation in pavement structures
IS 16393 : 2015Geotextiles used in Subsurface Drainage Application
IS 16362 : 2020Geotextiles used in Sub-grade Stabilisation in pavement structures
IS 16352 : 2020High Density Polyethylene (HDPE) Geomembranes for lining
IS 16090:2013Geotextiles used as protection (or cushioning) materials
IS 16392:2015Geotextiles for permanent erosion control in hard armor systems
IS 17371:2020Geogrids for flexible pavements
IS 17372:2020Polymeric strip or geostrip used as soil reinforcement in retaining structures
IS 17373:2020Geogrids used in reinforced soil retaining structures
IS 17374:2020Reinforced HDPE membrane for effluents and chemical resistance lining
IS 17483 (Part 1): 2020Geocells
IS 17483 (Part 2): 2020Geocells
IS 15741 : 2007Curtains and Drapes
IS 15768 : 2008Upholstered composites used for non-domestic furniture
IS 16890 : 2018Protective clothing for firefighters
IS 16874 : 2018Protective gloves for firefighters
IS 15748 : 2022Protective clothing for industrial workers exposed to heat
IS 15742 : 2007Clothing made of limited flame spread materials and material assemblies affording protection against heat and flame
IS 15809 : 2017High visibility Warning Clothes
IS 16655 : 2017Protective Clothing for use in welding and allied processes
IS 16725 : 2018Tactical 3 point sling
IS 16726 : 2018Pouch for ammunition and grenades made of disruptive pattern nylon-66
IS 17051 : 2018Bullet resistant jackets
IS 17286 : 2019Water-proof multipurpose rain poncho
IS/ISO 9994:2018Lighters- Safety Specifications
IS/ISO 22702:2018Utility Lighters – Safety Specifications
IS 17803: 2022Potable Water Bottles (Copper, Stainless Steel, Aluminum)
IS 814 : 2004Covered electrodes for manual metal arc welding of carbon and carbon manganese steel
IS 6419 : 1996Welding rode and bare electrodes for gas shielded arc welding of structural steel
IS 16444 Part 1A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2
IS 16444 Part 2A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S
IS 17790 : 2022Insulated Flask for Domestic Use
IS 17526 : 2021Domestic Stainless steel vacuum flask/bottle
IS 17569: 2021Insulated Container for Food Storage
IS 3513 (Part 1) : 1989Resin treated compressed wood laminates (compregs) – For electrical purposes
IS 3513 (Part 2) : 1989Resin treated compressed wood laminates (compregs) – For chemical purposes
IS 3513 (Part 3) : 1989Resin treated compressed wood laminates (compregs) – For general purposes
IS 1363 (Part 1) :2019Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64)
IS 1363 (Part 2) :2018Hexagon Head Screw (Size ranges from M 5 to 64)
IS 1363 (Part 3) :2018Hexagon Head Bolts, Screws and Nuts of product Grade C – Hexagon Nuts (Size Range M5 to M64)
IS 1364 (Part 1) :2018Hexagon Head Bolts, Screws and Nuts of product Grades A and B – Hexagon Head Bolts (Size Range M 1.6 To M 64)
IS 1364 (Part 2) :2018Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Hexagon Head Screws (Size Range M 1.6 to M 64)
IS 4621:1975Indicating Bolts for use in public baths and lavatories
IS 5187: 1972Flush Bolts
IS 10238:2001Fasteners – Threaded Steel Fastener – Step Bolts for Steel Structures
IS 12427 : 2001Fasteners – Threaded Steel Fasteners – Hexagon Head Transmission Tower Bolts
IS 3757 : 1985High Strength Structural Bolts
IS 204 (Part 2): 1992Tower Bolts- Non-ferrous metal
IS 204 (Part 1): 1991Tower Bolts- Ferrous metals
IS 15834 : 2022Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks
IS 2681 : 1993Non-ferrous metal sliding door bolts (aldrops) for use with padlocks
IS 281 : 2009Mild steel sliding door bolts for use with padlocks
IS 7534: 1985Sliding locking bolts for use with padlocks
IS 1284 : 1975Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes
IS 15833 : 2009Stainless steel Tower Bolts
IS 6623 : 2004High Strength Structural Nuts
IS 14756 : 2022Stainless Steel Cookware
IS 1660:2009Wrought Aluminium Utensils
IS 13983:1994Stainless Steel Sinks for Domestic Purposes
IS 9396 (Part 1) : 1987Round Open Top Sanitary Cans for Foods and Drinks – Tinplate
IS 14407:1996Aluminium cans for beverages
IS 17153:2019Domestic Gas Stoves for use with Piped Natural Gas (PNG)
IS 15683 : 2018Portable Fire Extinguishers
IS 16018:2012Wheeled Fire Extinguishers
Electric Ceiling Type Fans
IS 374:2019Electric Ceiling Type Fans
Wood Based Boards
IS 1659:2004Block Boards
IS 12823:2015Prelaminated particle boards from wood and other Lignocellulosic material
IS 3087:2005Particle boards of wood and other lignocellulosic materials (medium density) for general purpose
IS 12406:2021Medium density fibre boards for general purpose
IS 3097:2006Veneered particle boards
Cast Iron Products
IS 1726:1991Cast iron man hole covers and frames
IS 1729:2002Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipelines socket and spigot series
IS 1879:2010Malleable cast iron pipe fittings
IS 13349:1992Cast iron single faced thimble mounted sluice gates
IS 210:2009Grey iron castings
IS 1537:1976Vertically cast – iron pressure pipes for water, gas and sewage
Solar DC Cable and Fire Survival Cable
IS 17293:2020Electric Cable for Photovoltic Systems for rated voltage 1500V DC
IS 17505(Part 1): 2021Thermosetting Insulated, Fire Survival Cables for working voltage upto and including 1100V AC and 1500V DC
Metals and Alloys
IS 617:1994Cast aluminium and its alloys – Ingots and castings for general engineering purposes
IS 11890 : 1987High purity primary aluminum ingot for remelting for special applications
IS 6754:1972Aluminum alloy ingots for remelting for general engineering purpose
IS 2590 : 1987Primary aluminium ingots for remelting for general engineering purpose
IS 4026 : 2023Aluminum ingots billets and wire bars (EC GRADE)
IS 191:2007Copper
IS 7506:1987Nickel Powder
Plywood and Wooden flush door shutters
IS 303 : 1989Plywood for general purposes
IS 2202 (Part 1) : 1999Wooden flush door shutters (solid core type) – Plywood face panels
IS 710 : 2010Marine plywood
IS 5509 : 2021Fire retardant plywood
IS 1328 : 1996Veneered decorative plywood
IS 2191 (Part 2): 2022Wooden flush door shutters (cellular and hollow core type) – Particle board and hardboard face panels
IS 2191 (Part 1): 2022Wooden flush door shutters (cellular and hollow core type) – Plywood face panels
IS 2202 (Part 2): 2022Wooden Flush Door Shutters (Solid core type) – Particle board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels
IS 4990 : 2011Plywood for concrete shuttering works – Specification
IS 10701 : 2012Structural plywood – Specification
Flux Cored Solder Wire
IS 1921: 2005Flux Cored Solder Wire
Miscellaneous Steel Products
IS 15155 : 2020Bar or wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials
IS 16651 : 2017High Strength deformed stainless steel bars and wires for concrete reinforcement
IS 6392 : 2020Steel Pipe Flanges
IS 6913 : 1973Stainless steel tubes for the food and beverage industry
Aluminium and Aluminium Alloy Products
IS 7092 (Part 1):1992Aluminium alloy tubes for irrigation purposes -welded tubes
IS 7092 (Part 2):1987Aluminium alloy tube for irrigation purposes – extruded tube
IS 5484:1997EC Grade Aluminium Rod produced by Continuous Casting and Rolling
IS 733:1983Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes)
IS 734:1975Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes
IS 736:1986Wrought aluminium and aluminium alloy plate for general engineering purposes
IS 737:2008Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes
IS 739:1992Wrought aluminium and aluminium alloy wire for general engineering purposes
IS 740:1977Wrought aluminium and aluminium alloy rivet stock for general engineering purposes
IS 5082:1998Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications
IS 16011:2012Aluminium and aluminium alloy foil for pharmaceutical packaging
IS 17682:2021Aluminium composite panel
IS 1285:2002Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes
IS 2067:1975Wrought Aluminium Wire for Electrical Purposes
IS 21:1992Wrought aluminium and aluminium alloys for manufacture of utensils
IS 1254:2007Corrugated Aluminium Sheet
IS 7902:2001Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications
IS 2403 :2014 / ISO 606 : 2004Short – Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets
Self- Contained Drinking Water Coolers
IS 1475 (Part 1) : 2001Self- Contained Drinking Water Coolers – Energy Consumption and Performance
Medical Textiles
IS 5405 : 2019Sanitary napkins
IS 17509 : 2021Disposable baby diaper
IS 17514 : 2021Reusable Sanitary pad/ Sanitary Napkin/ Period Panties
IS 17349 : 2020Shoe covers
IS 17354 : 2020Dental Bib or Napkins
IS 17630 : 2021Bed sheet and Pillow Cover
Agro Textiles
IS 16718 : 2021Polypropylene Spun Bonded Non—Woven Crop Cover and Fruit Skirting Bags for Agriculture and Horticulture Applications
IS 16513 : 2016Insect nets for Agriculture and Horticulture purpose
IS 16202 : 2014Woven Ground covers for Horticulture Application
IS 17070 : 2019Jute Agro textiles for Growth of Plants and Suppression of Weeds
IS 15907 : 2010High Density Polyethylene (HDPE) woven beds for vermiculture
IS 16089 : 2013Sapling bags for growth of seedling /sapling
IS 16190 : 2014High Density Polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose
IS 16390 : 2015Nylon Knitted seamless gloves for tobacco harvesters
IS 16627 : 2017High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system
IS 17355 : 2020Propylene Spun bonded non—woven mulch mat for agriculture and horticulture applications
IS 17356 : 2020Windshield nets for agriculture and horticulture purpose
IS 17357 : 2020Harvest nets for agriculture and horticulture purposes
IS 17358 (Part 1) : 2020Fencing nets for agriculture and horticulture purposes – made from extruded polymer mesh
IS 17358 (Part 2) : 2020Fencing nets for agriculture and horticulture purposes -made from mono filament yarns and combination of tape and mono filament yarns
IS 17513 : 2020Plant Support Nets for Agriculture and Horticulture Purposes
IS 17728 : 2021High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System
IS 17729 : 2021Flexible Water Storage Tank for Agriculture and Horticulture Purposes
IS 17730 (Part 1) : 2021Hail Protection Nets for Agriculture and Horticulture Purposes- Warp Knitted Hail Protection Nets
IS 17730 (Part 2) : 2021Hail Protection Nets for Agriculture and Horticulture Purposes – Woven Hail Protection Nets
IS 17731 : 2021Laminated Woven Orchard Protection Covers
Copper Products
IS 12444:2020Copper Wire Rods for Electrical Applications
IS 613:2000Copper Rods and Bars for Electrical Purposes
IS 1897:2008Copper strip for electrical purposes
IS 4171:1983Copper rods and bars for general engineering purposes
IS 1545: 1994Solid drawn copper and copper alloy tubes for condensers and heat exchangers
IS 2501: 1995Solid drawn copper tubes for general engineering purposes
IS 14810: 2000Copper Tubes for plumbing- Specification/p>
IS 10773:1995Wrought Copper Tubes for Refrigeration and Air- Conditioning Purpose
IS 4412:1981Copper wires for general engineering purposes
Drums and Tins
IS 13997:2014Drums, Large Open Top
IS 1783 (Part 1) :2014Drums Large, Fixed Ends – Grade A
IS 1783 (Part 2) :2014Drums, Large, Fixed Ends – Grade
IS 2552:1989Steel Drums (Galvanized and Ungalvanized)
IS 3575:1993Bitumen Drums
IS 916:2000Square Tins for Solid Products
IS 10325:2000Square Tins – 15 Kilograms or litre for Ghee, Vanaspati, Edible Oils and Bakery
Door Fittings
IS 6343:1982Door closers (pneumatically regulated) for light doors weighing up to 40 kg
IS 14912:2001Door closers, concealed type (hydraulically regulated)
IS 3564:1995Hydraulically Regulated Door Closers
IS 6315:1992Floor springs (hydraulically regulated) for heavy doors
IS 1019:1974Rim Latches
IS 208:2020Door Handles
IS 4992:1975Door handles for mortice lock (vertical type)
Bottled Water Dispenser
IS 17681:2022Bottled water dispensers
Helmet for Police Force, Civil Defence and Personal Protection
IS 2745:1983Non-metal helmet for firemen and civil defence personnel
IS 2925:1984Industrial safety helmets
IS 9562:1980Non- metal helmet for Police Force
Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh
IS 2266 : 2019Steel Wire Ropes for General Engineering Purposes
IS 2365 : 2018Steel Wire Suspension Ropes for Lifts, Elevators and Hoists
IS 1855:2022Stranded steel wire ropes for winding and man –riding haulages in mines
IS 1856:2005Steel Wire Rope forhaulage
IS 2141:20005Hot Dip Galvanized Stay Strand
IS 4521:2001Wire Ropes Used in Oil Wells and Oil Well Drilling
IS 6590:1972Braided Nylon Ropes for Mountaineering Purposes
IS 278:2009Galvanized Steel Barbed Wire for Fencing
IS 16014:2018Mechanically Woven, Double- Twisted, Hexagonal Wire Mesh Gabions, Revet Mattresses and Rock Fall Netting and Other Rock Fall Netting and Other Products for Civil Engineering Purposes (Galvanized Steel Wire or Galvanized Steel Wire with polymer coating)
Material Measure of length
IS 1269(Part 1) : 1997Legal Metrology – Material Measure of length – Woven metallic and glass fibre tape measures
IS 1269(Part 2) : 1997Legal Metrology – Material Measure of length – Steel tape measures
Polyethylene Woven Sacks
IS 9755 : 2021Textiles—High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers
IS 11652 : 2017Textiles — High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement
IS 16709 : 2017Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement
IS 16703 : 2017Textiles — High Density Polyethylene (HDPE) Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials
IS 17399 : 2020Textiles — Polypropylene (PP)/ High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution
Safes, Safe Deposit Locker Cabinets and key locks
IS 550 (Part 1) : 2014Safes
IS 5244 : 2020Safe deposit locker cabinets
IS 17566 : 2021Key locks for security equipment
Hinges
IS 12817:2020Stainless steel butt hinges
IS 1341:2018Steel Butt Hinges
IS 205:1992Non-ferrous metal butt hinges
IS 206:2010Tee and strap hinges
IS 362:1991Parliament hinges
IS 3818:1992Continuous (Piano) hinges
IS 3843:1995Steel back flap hinges
IS 453:1993Double-acting spring hinges
IS 18297:2023Cabinet hinges
Cycle and Rickshaw Tyres and Tubes
IS 2414:2005Cycle and Rickshaw Pneumatic Tyres
IS 2415 :2015Cycle – Rubber Tubes (Moulded or Jointed)
Rubber Gaskets for Pressure Cookers
IS 7466 :1994Rubber Gaskets for Pressure Cookers
Laboratory Glassware
IS 878 :2008Laboratory glassware – Graduated measuring cylinders
IS 915:2012Laboratory glassware – One – Mark volumetric flasks
IS 1381 (Part 1):2003Laboratory glassware – Narrow-necked boiling flasks
IS 1117:2018Laboratory glassware – Single volume pipettes
IS 2619:2018Glass beakers
Electrical Accessories
IS 14772: 2020Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations
IS 14927 (Part 2): 2001Cable Trunking and Ducting Systems for Electrical Installations – Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling
IS 1258: 2005Bayonet Lamp Holders
IS 15787: 2008Switch-socket-outlets (non-interlock type)
IS 13774:2021Live Working Gloves of Insulating Material
IS 15652:2006Insulating Mats for Electrical Purposes
IS 7809 (Part3/ Sec1): 1986Specification for Pressure sensitive adhesive insulating tapes for electrical purposes- Part 3 requirements or individual materials – Sec 1 plasticized polyvinylchloride tapes with non- Thermosetting adhesive
IS 16012: 2012Poly- Laminated aluminium cable wrap
IS 17658:2021Poly Vinyl Chloride (PVC) Homopolymers
IS 10951: 2020Polypropylene (PP) Materials for Moulding and Extrusion
IS 17042 (Part-1): 2018Diesel Engines – NOx Reduction Agent AUS 32
IS 3315:2019Evaporative Air Coolers (Desert Coolers)
IS 17570 (Part 1): 2021 ISO 16890-2: 2016Air Filters for general ventilation – Technical specifications requirements and classification system based upon particulate matter efficiency (ePM)
IS 302 (Part 2/Sec 9): 2009Safety of household and similar electrical appliances – particular requirements – toasters, grills, roasters and similar appliances
IS 302 (Part 2/Sec 31): 2009Safety of household and similar electrical appliances – particular requirements – range hoods
IS 302 (Part 2/Sec 23): 2009Safety of household and similar electrical appliances – particular requirements – appliances for skin or hair care
IS 302 (Part 2/ Sec 80): 2017Household and similar electrical appliances – Safety – particular requirements for fans
IS 302 (Part 2/Sec 75): 2018Safety of Household and Similar Electrical Appliances – Particular Requirements – Commercial Dispensing Appliances and Vending Machines
IS 302 (Part 2/Sec 7): 2010Safety of household and similar electrical appliances – particular requirements – domestic electric clothes washing machines
IS 459:1992Corrugated and Semi – Corrugated Asbestos Cement Sheets
IS 1592:2003Asbestos Cement Pressure Pipes and Joints
IS 2096:1992Asbestos Cement Flat Sheets
IS 2098:1997Asbestos Cement Building Boards
IS 6908:1991Asbestos – Cement Pipes and Fittings for Sewerage and Drainage
IS 13000:1990Silica-Asbestos-Cement Flat Sheets
IS 8870:1978Asbestos Cement Cable Conduits and Troughs
IS 9627:1980Asbestos Cement Pressure Pipes (Light Duty)
IS 13008:1990Shallow Corrugated Asbestos Cement Sheets
IS 14862:2000Fibre Cement Flat Sheets
IS 14871:2000Fibre Reinforced Cement Products – Long Corrugated or Asymmetrical Section Sheets and Fittings for Roofing and Cladding
IS 2373:1981Water meters (bulk type)
IS 779: 1994Water meters (domestic type)
IS 2692: 1989Ferrules for water services
IS 2095 (Part 1):2011Gypsum plaster boards – Specification: Part 1 plain gypsum plaster boards
IS 17400:2021Glass Fibre Reinforced Gypsum Panels
IS 2095 (Part 2): 2022Gypsum Plaster Boards – Coated/ Laminated Gypsum Plaster Boards
IS 2095 (Part 3):2022Gypsum Plaster Boards – Reinforced Gypsum Plaster Boards and Ceiling Tiles
Electrical Appliances for domestic water heating
IS 302 (Part 2/Sec 21): 2018Appliances for stationary storage type electric water heaters
IS 302 (Part 2/Sec 35): 2017Appliances for electric instantaneous water heaters
IS 368: 2014Electric Immersion Water Heaters
IS 2082: 2018Stationary storage type electric water heaters
IS 17150: 2019Mini domestic water heater for use with piped natural gas (PNG)s
V-Belt
IS 2494 (Part 1): 1994V-Belts – Endless V-Belts for Industrial Purposes – General Purpose
IS 2494 (Part 2): 1993V-Belts – Endless V-Belts for Industrial Purposes – fire resistant and antistatic V-Belts
IS 14261: 1995Transmission Devices – V – Belts endless narrow V-Belts for industrial use

2. Products Requiring BIS Registration (Scheme II, Compulsory Registration Scheme (CRS))

НомерЗаголовокПродукт
IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsElectronic Games (Video)
IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsLaptop/Notebook/Tablets
IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsPlasma/ LCD/LED Televisions of screen size 32″ & above
IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsOptical Disc Players with built in amplifiers of input power 200W and above
IS 302-2-25Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovensMicrowave Ovens
IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsVisual Display Units, Video Monitors of screen size 32″ & above
IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsPrinters, Plotters
IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsScanners
IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsWireless Keyboards
IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsTelephone Answering Machines
IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsAmplifiers with input power 2000W and above
IS 616Audio, Video and Similar Electronic Apparatus – Safety RequirementsElectronic Musical Systems with input power 200W and above
IS 302-2:26Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 26 ClocksElectronic Clocks with Mains Powers
IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsSet Top Box
IS 13252 (Part 1)Information Technology Equipment – Safety – General RequirementsAutomatic Data Processing Machine
IS 13252 (Part 1)Information Technology Equipment- Safety General RequirementsPower Adaptors for IT Equipments
IS 616Audio, Video and Similar Electronic Apparatus-Safety RequirementsPower Adaptors for Audio, Video & Similar Electronic Apparatus
IS 16242 (Part 1)General and Safety Requirements for UPSUPS/Invertors of rating≤5kVA
IS 15885 (Part 2/Sec 13)Safety of Lamp Control gear Part 2 Particular Requirements Section 13 d.c. or a.c. Supplied Electronic Control gear for LED ModulesDC or AC Supplied Electronic Control gear for LED Modules
IS 16046Secondary Cells and Batteries containing Alkaline or other non-acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applicationsSealed Secondary Cells/Batteries containing Alkaline or other non-acid Electrolytes for use in portable applications
IS 16102(Part 1)Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety RequirementsSelf-Ballasted LED Lamps for General Lighting Services
10322 (Part 5/Sec 1)Luminaries Part 5 Particular Requirements Sec 1 Fixed General purpose luminariesFixed General Purpose LED Luminaries
IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsMobile Phones
IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsCash Registers
IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsPoint of Sale Terminals
IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsCopying Machines/Duplicators
IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsSmart Card Readers
IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsMail Processing Machines/Postage Machines/Franking Machines
IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsPassport Reader
IS 13252 (Part 1)Information Technology Equipment-Safety-General RequirementsPower Banks for use in portable applications
IS 16333 (Part-3)Mobile Phone Handsets Part 3 Indian Language Support for Mobile Phone Handsets – Specific RequirementsMobile Phones
IS 10322 (Part 5/Section 2): 2012Luminaires Part 5: Particular Requirements Section 2 Recessed LuminairesRecessed LED Luminaries
IS 10322 (Part 5/Section 3): 2012Luminaires – Part 5: Particular Requirements Section 3 Luminaires for Road and Street LightingLED Luminaires for Road and Street lighting
IS 10322 (Part 5/Section 5): 2013Luminaires – Part 5: Particular Requirements Section 5 Flood LightsLED Flood Lights
IS 10322 (Part 5/Section 6): 2013Luminaires – Part 5: Particular Requirements Section 6 Hamp LampsLED Hand lamps
IS 10322 (Part 5/Section 7): 2013Luminaires – Part 5: Particular Requirements Section 7 Lighting ChainsLED Lighting Chains
IS 10322 (Part 5/Section 8): 2013Luminaires – Part 5: Particular Requirements Section 8 Luminaires for Emergency LightingLED Luminaires for Emergency Lighting
IS 16242 (Part 1):2014General and Safety Requirements for UPSUPS/Inverters of rating ≤ 10kVA
IS 616:2010Audio, Video and Similar Electronic Apparatus – Safety RequirementsPlasma/ LCD/LED Television of screen size up-to 32”
IS 13252 (Part 1):2010Information Technology Equipment –Safety General RequirementsVisual Display Units, Video Monitors of screen size up-to 32”
IS 13252 (Part 1):2010Information Technology Equipment –Safety General RequirementsCCTV Cameras/CCTV Recorders
IS 302 (Part 1): 2008Safety of Household and similar electrical appliances Part 1 General requirementsAdapters for household and similar electrical appliances
IS 13252 (Part 1):2010Information Technology Equipment –Safety General RequirementsUSB driven Barcode readers, barcode scanners, Iris scanners, Optical fingerprint scanners
IS 13252 (Part 1):2010Information Technology Equipment –Safety General RequirementsSmart watches
IS 16103 (Part 1): 2012LED modules for general lighting: Part 1 safety requirementsStandalone LED Modules for General Lighting
IS 10322 (Part 5)Section 9: 2017Luminaries: Part 5 Particular Requirements Section 9 Rope LightsLighting Chain (Rope Lights)
IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsKeyboard
IS 302 (Part 2): Section 6: 2009Safety of household and similar electrical appliances: part 2 particular requirements, section 6 cooking ranges, hobs, ovens and similar appliancesInduction Stove
IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsAutomatic Teller Cash dispensing machines
IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsUSB Type External Hard Disk Drive
IS 616: 2017Audio, video and similar electronic apparatus-safety requirementsWireless Headphone and Earphone
IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsUSB Type External Solid- State Storage Devices (above 256 GB capacity)
IS 616: 2017Audio, video and similar electronic apparatus-safety requirementsElectronic Musical System with input power below 200 Watts
IS 13252 (Part 1) :2010Information technology equipment – safety part 1 general requirementsStandalone Switch Mode Power Supplies (SMPS)with output voltage 48 V (max)
IS 616: 2017Audio, video and similar electronic apparatus-safety requirementsTelevision other than Plasma/ LCD/LED TVs
IS 302 (Part 2): Section 15: 2009safety of household and similar electrical appliances: part 2 particular requirements: section 15 appliances for heating liquidsRice Cooker
IS 616:2017Audio, video and similar electronic apparatus-safety requirementsWireless microphone
IS 13252 (Part 1): 2010Information technology equipment – safety part 1 general requirementsDigital Camera
IS 616:2017Audio, video and similar electronic apparatus-safety requirementsVideo Camera
IS 616:2017Audio, video and similar electronic apparatus-safety requirementsWebcam (Finished Product)
IS 616:2017Audio, video and similar electronic apparatus-safety requirementsSmart Speakers (with and without Display)
IS 60669-2-1: 2008Particular requirements for Electronic switches standards for Switches for household and similar fixed electrical installations.Dimmers for LED products
IS 616:2017Audio, video and similar electronic apparatus-safety requirements.Bluetooth speakers
IS 18112:2022Digital Television Receiver for Satellite Broadcast Transmission – SpecificationTelevision Sets
2. List of Solar Photovoltaics, Systems, Devices and Components under Compulsory Registration Scheme- Notified by Ministry Of New and Renewable Energy
НомерЗаголовокПродукт
IS 14286Crystalline Silicon Terrestrial Photovoltaic (PV) modules – Design Qualification And Type ApprovalCrystalline Silicon Terrestrial Photovoltaic (PV) modules (Si wafer based)
IS/IEC 61730 -1
IS/IEC 61730 -2
IS 16077Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type ApprovalThin-Film Terrestrial Photovoltaic (PV) Modules (a-Si, CiGs and CdTe)
IS/IEC 61730 -1
IS/IEC 61730 -2
IS 16221 (Part 2)Safety of Power Converters for Use in Photovoltaic Power Systems Part 2-Particular Requirements for InvertersPower converters for use in photovoltaic power system
IS 16169Test Procedure of Islanding Prevention Measures for Utility-Interconnected Photovoltaic InvertersUtility –Interconnected Photovoltaic inverters
IS 16270Secondary Cells and Batteries for Solar Photovoltaic Application General-Requirements and Methods of TestStorage battery
3. List of chemicals notified by Ministry of Chemicals and Fertilizers.
IS 798:2020Ortho Phosphoric Acid – SpecificationOrtho Phosphoric Acid
IS 17439:2020Polyphosphoric Acid – SpecificationPolyphosphoric Acid
IS 17412:2020Trimethyl Phosphite – Technical GradeTrimethyl Phosphite
4. List of Textile material notified by Ministry of Textiles
НомерЗаголовокПродукт
IS 12171:2019Cotton Bales- SpecificationCotton Bales

3. Products Requiring BIS Certification (Scheme X)

НомерЗаголовокПродукт
IS/IEC 60947: Part 2: 2016Circuit-breakers
IS/IEC 60947: Part 3: 2012Switches, disconnectors, switch disconnectors and fuse-combination units
IS/IEC 60947: Part 4: Sec 1: 2012Contactors and motor-starters, electromechanical contactors, and motor
IS/IEC 60947: Part 4: Sec 2: 2011Contactors and motor-starters, AC semiconductor motor controllers and starters
IS/IEC 60947: Part 4: Sec 3: 2014Contactors and motor-starters, AC semiconductor motor controllers and contactors for non-motor loads
IS/IEC 60947: Part 5: Sec 1: 2009Control circuit devices and switching elements, electromechanical control circuit devices
IS/IEC 60947: Part 5: Sec 2: 2007Control circuit devices and switching elements, proximity switches
IS/IEC 60947: Part 5: Sec 5: 2016Control circuit devices and switching elements, electrical emergency stop devices with mechanical latching function